- ページ 4

ソフトウェア Xerox WorkCentre Pro 255のPDF 補足マニュアルをオンラインで閲覧またはダウンロードできます。Xerox WorkCentre Pro 255 20 ページ。 Xerox multifunction printers detailed specifications
Xerox WorkCentre Pro 255 にも：クイック・インストール・マニュアル (2 ページ), リファレンス・マニュアル (27 ページ), 仕様 (21 ページ), 評価者マニュアル (27 ページ)

1 Introduction

Copied jobs

The Insert feature is used for producing copied sets with imaged or non-imaged tab

dividers.

This feature, located on the

Basic Copying, Job Assembly

tab enables you to insert tab

stock into your copied sets and

print onto the tabs.

The screen contains instructions

for loading the tab stock into the

paper trays and the controls for

selecting the position of your tab stock in your final sets.

The Job Build feature is used to:

- copy jobs that exceed 70 pages

- copy an original document that has tab dividers.

Using this supplement

The instructions in this booklet will help you print and copy tab dividers:

Type of Job

Copy onto tabs only

Copy onto tabs automatically collated into the

copied sets

Make a copy of a document that has printed

tab dividers

Print onto tabs only

Print onto tabs as automatically collated into

the printed sets

Specifications

Parameter

Paper Trays

Tab Stock Sizes

Number of tabs per set

Number of tab positions

Weight of tab stock

Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement

5, 19,

Go to section...

Specification

Tab stock can only be loaded into

the Bypass Tray, Tray 1 or Tray 2

A4, 8.5 x11 inches (9 x 11 inches)

up to 5

200 g/m² or 53lb stock