- ページ 7

医療機器 Direct Supply Panacea Air Element MattressのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Direct Supply Panacea Air Element Mattress 20 ページ。 Pump and mattress system

ページを印刷する

Direct Supply Panacea Air Element Mattress オーナーズマニュアル

4. Plug the power cord into an electrical outlet with the appropriate voltage.

NOTE: The pump unit must be suitable for the local power voltage.

5. Turn the main power switch on pump to the ON position. After you connect power to the

pump, you will have to wait at least 30 minutes for the mattress to become fully inflated. The

low-pressure indicator (yellow or red LED) will illuminate while the mattress is pressurizing. The

audible alarm won't sound within 40 minutes; after that, the audible alarm will be activated if the

pressure is still low inside the mattress.

When the appropriate pressure is reached, the low-pressure indicator (yellow or red LED) will go off

and the normal-pressure indicator (green LED) will illuminate. The bed is now ready for use.

NOTE: You can unplug the unit to power off the device.

•

CAUTION: The pump supplied with the mattress

can only be used for mattresses recommended by the

manufacturer. Do not use it for any other purpose.

NOTE: (For models WITHOUT the low air loss function)

During power outages, you can cover the Quick

Connector with the transport cap to maintain air pressure

inside the air cells.

NOTE: After installation, make sure any excess cord

or tubing is removed from possible foot traffic to avoid

accidental tripping. All equipment should be positioned to

always allow unhindered resident access by physicians

and caregivers.

1-800-634-7328

DirectSupply.com