- ページ 5
コントローラー eControls RT2のPDF 住宅所有者とインストーラー・マニュアルをオンラインで閲覧またはダウンロードできます。eControls RT2 12 ページ。 Wireless whf control
eControls RT2 にも： ユーザー＆インストーラーズマニュアル (8 ページ)
ページを印刷するChange the Fan Speed
For single speed WHFs, the fan speed will be displayed
as Hi and cannot be adjusted. For 2, 3 or variable speed
WHFs, the speed can be adjusted by pressing the Fan
Speed and using the UP and DOWN Keys.
Changing 2 or 3-Speed WHFs
Press here to change
the WHF speed.
Use the UP and DOWN keys to
Link
ed
select the fan speed then press
ENTER.
Econo
Cooling
ON
Menu
Enter
High speed (Hi)
Medium speed (Int)
Low speed (Lo)
Changing Variable Speed WHFs
Press here to change
the WHF speed.
Use the UP key to increase the
Link
ed
WHF speed or the DOWN key to
decrease the WHF speed. Adjusts
Econo
Cooling
in 5% increments. Press ENTER.
ON
Menu
Enter
HOMEOWNER - WHF OPERATION
Outdoors
Indoors
o
F
Cool
Link
ed
Set To
Econo
Cooling
ON
Menu
Outdoors
Indoors
o
F
Cool
Link
ed
Set To
Econo
Cooling
ON
Menu
Changing Batteries
Two AA Alkaline batteries are supplied with the RT2
Remote Control. Expected battery life is 1 to 2 years.
The RT2 backlight will dim or go off when it's time to
change the batteries.
Although the batteries may be replaced with Alkaline
batteries, it is highly recommended that Lithium batteries
be used for a much longer battery life than Alkaline
batteries.
Large retail chains, such as Target and Walmart, carry
Energizer Ultimate Lithium AA batteries.
Slide the battery cover down.
Place the batteries in the RT2,
making sure the polarity is correct.
Slide the battery cover up. The
RT2 is now ready for operation.
Homeowner Help
Loss of Communication
If the RT2 is dropped or batteries are removed, there is a
built-in safety feature that will automatically turn the fan
off after 15 minutes without communication from the RT2.
Replacement Units
The RT2 and RM2 in this kit are uniquely addressed and
only work with each other. If you need a replacement
RT2 remote or RM2 radio module, please contact us at
949-916-6701.
5