- ページ 35
楽器 Yamaha Clavinova CLP-320のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha Clavinova CLP-320 44 ページ。 Quick operation guide
Yamaha Clavinova CLP-320 にも： データ一覧 (6 ページ), クイック・オペレーション・マニュアル (2 ページ)
ページを印刷する
2.
Attach B.
Depending on the model of Clavinova you pur-
chased, the surface color of one side of B may be
different from the other side. In this case, position
B so that the side of the surface color similar to D
and E faces the player.
2-1 Place the lower side of B on each foot of D
and E, then attach the upper side to D and
E.
2-2 Attach the top of B to D and E by finger-
tightening the thin screws 3 (4 × 12mm).
2-3 While pushing the lower part of D and E
from outside, secure the bottom ends of B
using two tapping screws 4 (4 × 20mm).
2-4 Insert the other two tapping screws 4 (4 ×
20mm) into the other two screw holes to
secure B.
2-5 Securely tighten the screws on the top of B
that were attached in Step 2-2.
E
2-1
Place the bot-
tom ends of the
rear panel on
each foot.
2-3
2-4
3.
Securely tighten the screws on C
that were attached in Step 1-3.
B
3
2-2, 2-5
B
D
2-3
C
4.
Mount A.
Be sure to place your hands at
least 10 cm from either end of the
main unit when positioning it.
A
At least
E
10 cm
B
CAUTION
•
Fingers can become pinched between the main
unit and the rear or side panels, be extra careful
so as not to drop the main unit.
•
Do not hold the keyboard in any position other
than the position shown in the illustration.
5.
Secure A.
5-1 Adjust the position of A so that the left and
right ends of A will project beyond D and E
equally when seen from the front.
5-2 Secure A by tightening the short screws 2
(6 × 16mm) from the front.
Projection
of A
Keyboard Stand Assembly
D
5-1
A
A
5-2
Owner's Manual
CLP-320
35