Yamaha Clavinova CLP-320 소유자 매뉴얼 - 페이지 35

{카테고리_이름} Yamaha Clavinova CLP-320에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Clavinova CLP-320 44 페이지. Quick operation guide
Yamaha Clavinova CLP-320에 대해서도 마찬가지입니다: 데이터 목록 (6 페이지), 빠른 작동 매뉴얼 (2 페이지)

페이지 인쇄

Attach B.

Depending on the model of Clavinova you pur-

chased, the surface color of one side of B may be

different from the other side. In this case, position

B so that the side of the surface color similar to D

and E faces the player.

2-1 Place the lower side of B on each foot of D

and E, then attach the upper side to D and

2-2 Attach the top of B to D and E by ﬁnger-

tightening the thin screws 3 (4 × 12mm).

2-3 While pushing the lower part of D and E

from outside, secure the bottom ends of B

using two tapping screws 4 (4 × 20mm).

2-4 Insert the other two tapping screws 4 (4 ×

20mm) into the other two screw holes to

secure B.

2-5 Securely tighten the screws on the top of B

that were attached in Step 2-2.

2-1

Place the bot-

tom ends of the

rear panel on

each foot.

2-3

2-4

Securely tighten the screws on C

that were attached in Step 1-3.

2-2, 2-5

2-3

Mount A.

Be sure to place your hands at

least 10 cm from either end of the

main unit when positioning it.

At least

10 cm

CAUTION

•

Fingers can become pinched between the main

unit and the rear or side panels, be extra careful

so as not to drop the main unit.

•

Do not hold the keyboard in any position other

than the position shown in the illustration.

Secure A.

5-1 Adjust the position of A so that the left and

right ends of A will project beyond D and E

equally when seen from the front.

5-2 Secure A by tightening the short screws 2

(6 × 16mm) from the front.

Projection

of A

Keyboard Stand Assembly

5-1

5-2

Owner's Manual

CLP-320