- ページ 2

楽器 Yamaha disklavier DKC-850のPDF インターネット接続マニュアルをオンラインで閲覧またはダウンロードできます。Yamaha disklavier DKC-850 2 ページ。 Internet connection guide
Yamaha disklavier DKC-850 にも：データ一覧 (16 ページ), 機能マニュアル (13 ページ), 更新マニュアル (5 ページ), 更新マニュアル (45 ページ), クイック・スタート・マニュアル (2 ページ), 接続マニュアル (6 ページ), ユーザーマニュアル (22 ページ)

6/4/2011

PRESS

CONFIRM

NETWORK

SETTINGS

PRESS

Attention:

*Once connected to Internet Direct Connection, you'll be able to enjoy Yamaha's Piano Radio services. Don't have a

subscription?

Get one

now.

*If you have connected successfully and would like to view Radio Service for Piano playback instructions,

Instructions.

...yamaha.com/connect/wirelessType?t...

Yamaha: Connect to Radio Service For ...

If you see a screen saying that you are not successfully connected,

you may need to set up your instrument to connect to your

network. To do so, press [Setup], then [Network] from your remote

control.

Here you can update your DHCP, DNS, proxy, and manual IP

settings. In most cases you will not need to edit these settings.

Unless you are manually assigning DNS or IP locations for your

instrument, you can set DHCP to "On" and your network should

automatically configure the settings to connect successfully.

If you want to enter your DNS server addresses manually, you can

choose "DHCP and DNS".

If you also want to enter your IP address, subnet mask, and

gateway server information, select "Manual." Also, if you're using a

proxy server you will need to enter its name and port here in order

to connect.

Note: If you have any questions about the settings for your

network, please contact your internet service provider or refer to the

documentation for your router.

After entering and confirming your network settings, return to the

Internet Direct Connection home page by pressing "Internet" on

your remote.

visit Playback

2/2