- ページ 13

楽器 Yamaha YPT-260のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha YPT-260 48 ページ。 Digital keyboard
Yamaha YPT-260 にも：オーナーズマニュアル (28 ページ), オーナーズマニュアル (28 ページ), オーナーズマニュアル (28 ページ), オーナーズマニュアル (50 ページ), オーナーズマニュアル (28 ページ), オーナーズマニュアル (28 ページ)

ページを印刷する

NOTE

• This instrument cannot charge the batteries. Use only the

specified charger device when charging.

• Power will be automatically drawn from the AC adaptor if an

AC adaptor is connected while batteries are installed in the

instrument.

 Setting the battery type

Depending on the battery type to be used, you may

need to change the battery type setting on this instru-

ment. Alkaline (and manganese) batteries are cho-

sen by default. After installing new batteries and

turning the power on, make sure to set the Battery

Type appropriately (rechargeable or not) via Function

number 022 (page 32).

NOTICE

• Failure to set the battery type may shorten the amount of

the battery life. Make sure to set the battery type correctly.

Turning the Power On

Turn down the [MASTER VOLUME] dial to "MIN" .

Press the [

] (Standby/On) switch to turn the

power on.

The Voice name appears on the display. Adjust

the volume as desired while playing the key-

board.

Press and hold the [

about a second to set the instrument to standby

mode.

CAUTION

• Even when the [

] (Standby/On) switch is in standby sta-

tus, electricity is still flowing to the product at the mini-

mum level. Remove the electric plug from the outlet when

the instrument is not to be used for extended periods of

time, or during electrical storms.

NOTICE

• Press only the [

] (Standby/On) switch when turning the

power on. Any other operations such as pressing the pedal

are not allowed. Doing so may cause the instrument to

malfunction.

] (Standby/On) switch for

Setting the Auto Power Off

function

To prevent unnecessary power consumption, this

instrument features an Auto Power Off function that

automatically turns the power off if the instrument is

not operated for a specified period of time. The

amount of time that elapses before the power is

automatically turned off is 30 minutes by default;

however, you can change the setting.

 To set the time that elapses before

Auto Power Off is executed:

Press the [FUNCTION] button several times until

"AutoOff" (Function 021; page 32) appears, then use

the [+] or [-] button to select the desired value.

Settings: OFF, 5, 10, 15, 30, 60, 120 (minutes)

Default value: 30 (minutes)

 To disable the Auto Power Off function:

Turn the power on while holding down the lowest key

on the keyboard. A message "oFF AutoOff" appears

briefly, then the instrument starts up with the Auto

Power Off function disabled. The Auto Power Off

function also can be disabled by selecting Off in

Function number 021 (page 32).

NOTICE

• Depending on the instrument status, the power may not

turn off automatically, even after the elapse of the specified

period of time. Always turn off the power manually when

the instrument is not in use.

• When the instrument is not operated for a specified period

of time while connected to an external device such as an

amplifier, speaker or computer, make sure to follow the

instructions in the Owner's Manual to turn off the power to

the instrument and the connected devices, in order to pro-

tect the devices from damage. If you do not want the

power to turn off automatically when a device is con-

nected, disable Auto Power Off.

NOTE

• Generally, the data and settings are maintained even when

the power is turned off with the Auto Power Off function. For

details, see page 33.

PSR-E263 YPT-260 Owner's Manual

Setting Up