Yamaha YPT-260 Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Instrument muzyczny Yamaha YPT-260. Yamaha YPT-260 48 stron. Digital keyboard
Również dla Yamaha YPT-260: Instrukcja obsługi (28 strony), Instrukcja obsługi (28 strony), Instrukcja obsługi (28 strony), Instrukcja obsługi (50 strony), Instrukcja obsługi (28 strony), Instrukcja obsługi (28 strony)
Drukuj stronę
NOTE
• This instrument cannot charge the batteries. Use only the
specified charger device when charging.
• Power will be automatically drawn from the AC adaptor if an
AC adaptor is connected while batteries are installed in the
instrument.
Setting the battery type
Depending on the battery type to be used, you may
need to change the battery type setting on this instru-
ment. Alkaline (and manganese) batteries are cho-
sen by default. After installing new batteries and
turning the power on, make sure to set the Battery
Type appropriately (rechargeable or not) via Function
number 022 (page 32).
NOTICE
• Failure to set the battery type may shorten the amount of
the battery life. Make sure to set the battery type correctly.
Turning the Power On
1
Turn down the [MASTER VOLUME] dial to "MIN" .
2
Press the [
] (Standby/On) switch to turn the
power on.
The Voice name appears on the display. Adjust
the volume as desired while playing the key-
board.
3
Press and hold the [
about a second to set the instrument to standby
mode.
CAUTION
• Even when the [
] (Standby/On) switch is in standby sta-
tus, electricity is still flowing to the product at the mini-
mum level. Remove the electric plug from the outlet when
the instrument is not to be used for extended periods of
time, or during electrical storms.
NOTICE
• Press only the [
] (Standby/On) switch when turning the
power on. Any other operations such as pressing the pedal
are not allowed. Doing so may cause the instrument to
malfunction.
] (Standby/On) switch for
Setting the Auto Power Off
function
To prevent unnecessary power consumption, this
instrument features an Auto Power Off function that
automatically turns the power off if the instrument is
not operated for a specified period of time. The
amount of time that elapses before the power is
automatically turned off is 30 minutes by default;
however, you can change the setting.
To set the time that elapses before
Auto Power Off is executed:
Press the [FUNCTION] button several times until
"AutoOff" (Function 021; page 32) appears, then use
the [+] or [-] button to select the desired value.
Settings: OFF, 5, 10, 15, 30, 60, 120 (minutes)
Default value: 30 (minutes)
To disable the Auto Power Off function:
Turn the power on while holding down the lowest key
on the keyboard. A message "oFF AutoOff" appears
briefly, then the instrument starts up with the Auto
Power Off function disabled. The Auto Power Off
function also can be disabled by selecting Off in
Function number 021 (page 32).
NOTICE
• Depending on the instrument status, the power may not
turn off automatically, even after the elapse of the specified
period of time. Always turn off the power manually when
the instrument is not in use.
• When the instrument is not operated for a specified period
of time while connected to an external device such as an
amplifier, speaker or computer, make sure to follow the
instructions in the Owner's Manual to turn off the power to
the instrument and the connected devices, in order to pro-
tect the devices from damage. If you do not want the
power to turn off automatically when a device is con-
nected, disable Auto Power Off.
NOTE
• Generally, the data and settings are maintained even when
the power is turned off with the Auto Power Off function. For
details, see page 33.
PSR-E263 YPT-260 Owner's Manual
Setting Up
13