- ページ 7

レシーバー Yamaha RX-V671のPDF 簡単セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha RX-V671 8 ページ。 Setup guide
Yamaha RX-V671 にも：簡単セットアップマニュアル (8 ページ)

Use the cursor keys to select

"Save/Cancel" and press ENTER.

Use the cursor keys to select "SAVE" and

press ENTER.

Disconnect the YPAO microphone from

this unit.

Now optimization of the speaker settings is

complete.

• Since the YPAO microphone is sensitive to heat, do not place

the microphone in any place where it will be subjected to direct

sunlight or high temperatures (top of an AV equipment, etc).

If "W-1: Out of Phase" appears

Follow the procedure below to check the speaker

connections.

Depending on the type of speakers or room

environment, this message may appear even if the

speakers are connected correctly.

Use the cursor keys to select "Result" and press ENTER.

Use the cursor keys to select "Wiring".

Check the cable connections (+/-) of the speaker

indicated with "Reverse".

If the speaker is connected correctly:

You can save the current settings.

Press RETURN and proceed to step 3.

If the speaker is connected incorrectly:

Turn off this unit, reconnect the speaker cable, and then

try YPAO measurement again.