Yamaha RX-V671 간편한 설정 매뉴얼 - 페이지 7

{카테고리_이름} Yamaha RX-V671에 대한 간편한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha RX-V671 8 페이지. Setup guide
Yamaha RX-V671에 대해서도 마찬가지입니다: 간편한 설정 매뉴얼 (8 페이지)

Use the cursor keys to select

"Save/Cancel" and press ENTER.

Use the cursor keys to select "SAVE" and

press ENTER.

Disconnect the YPAO microphone from

this unit.

Now optimization of the speaker settings is

complete.

• Since the YPAO microphone is sensitive to heat, do not place

the microphone in any place where it will be subjected to direct

sunlight or high temperatures (top of an AV equipment, etc).

If "W-1: Out of Phase" appears

Follow the procedure below to check the speaker

connections.

Depending on the type of speakers or room

environment, this message may appear even if the

speakers are connected correctly.

Use the cursor keys to select "Result" and press ENTER.

Use the cursor keys to select "Wiring".

Check the cable connections (+/-) of the speaker

indicated with "Reverse".

If the speaker is connected correctly:

You can save the current settings.

Press RETURN and proceed to step 3.

If the speaker is connected incorrectly:

Turn off this unit, reconnect the speaker cable, and then

try YPAO measurement again.