- ページ 19

自動車アクセサリー Directechs DIRECTED DB3 403.FORD18のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Directechs DIRECTED DB3 403.FORD18 20 ページ。

ページを印刷する

Directechs DIRECTED DB3 403.FORD18 取扱説明書

Quick Reference Guide (customer copy)

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there

are 3 possible ways you can send commands to your vehicle, using the:

Factory remote.

2. Aftermarket remote.

3. Directed SmartStart

application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3 times

quickly on your factory remote.

Vehicle takeover

Close the vehicle doors, hood and trunk, then send the

Remote Start command to start the vehicle.*

Send the Unlock command on the factory or aftermarket

remote.*

Complete the following steps within 45 seconds or the vehicle will shut down.

Enter the vehicle.

Note: In a PTS vehicle, make sure the factory remote is

inside with you.

Insert your key in the ignition barrel and turn it to the ON

position.

Press the PTS button twice.

Depress the brake pedal, put the car in gear and drive

off.

* Icon and remote appearance may differ depending on the model purchased.

403.FORD18 1.06 2021 Lincoln Nautilus (Smart Key)

Press Remote

Start button*

Press Unlock on

either remote*

Enter

vehicle

Key OUT

Key IN

START

Ready to

drive off

Pit stop/idle mode

The vehicle pit stop/idle mode feature is not available in this firmware.

Remote Start Limitations

• Depending on your vehicle, there may be a limit of only 1 or 2 remote starts before

needing to key start the vehicle to allow additional remote start activations. Please refer

to the vehicle's owner manual for the specific limitations of your vehicle.

• Vehicle must be locked and armed for at least 45 seconds before remote starting.

• The remote start system will not work in the following conditions:

� The ignition is on.

� The alarm system is triggered.

� The doors/hood are open.

� The transmission is not in Park (P).

14:36

� The vehicle battery voltage is too low.

� The service engine light is on.

14:36

Remote Start Ready (RSR)

Remote Start Ready (RSR) is a function that enables the interface module

to remote start the vehicle completely on its own. Consequently, there is

no need for an aftermarket or an OEM remote starter in order to start the

vehicle from a distance.

3x OEM Lock Remote Start Activation

This solution includes the option to remote start your vehicle by pressing the Lock button

Key IN

START

3 times consecutively. If your vehicle allows the OEM remote to remain active while the

engine is running, you may shut down your remote starter by pressing the Lock button 3

times once more.

Note: The range offered by OEM remotes is limited and typically requires you to be within

eyesight of the vehicle to control it.