Directechs DIRECTED DB3 403.FORD18 Instruction Manual - Page 19
Browse online or download pdf Instruction Manual for Automobile Accessories Directechs DIRECTED DB3 403.FORD18. Directechs DIRECTED DB3 403.FORD18 20 pages.
Print Page
Quick Reference Guide (customer copy)
Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there
are 3 possible ways you can send commands to your vehicle, using the:
1.
Factory remote.
2. Aftermarket remote.
3. Directed SmartStart
application via your smartphone.
®
If applicable, you can also start the engine remotely by pressing the Lock button 3 times
quickly on your factory remote.
Vehicle takeover
Close the vehicle doors, hood and trunk, then send the
1
Remote Start command to start the vehicle.*
Send the Unlock command on the factory or aftermarket
2
remote.*
Complete the following steps within 45 seconds or the vehicle will shut down.
Enter the vehicle.
3
Note: In a PTS vehicle, make sure the factory remote is
inside with you.
Insert your key in the ignition barrel and turn it to the ON
position.
4
OR
Press the PTS button twice.
Depress the brake pedal, put the car in gear and drive
5
off.
* Icon and remote appearance may differ depending on the model purchased.
19
403.FORD18 1.06 2021 Lincoln Nautilus (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Press Remote
Start button*
Press Unlock on
either remote*
Enter
vehicle
Key OUT
Key IN
Key IN
START
START
OR
Ready to
drive off
Pit stop/idle mode
The vehicle pit stop/idle mode feature is not available in this firmware.
Remote Start Limitations
• Depending on your vehicle, there may be a limit of only 1 or 2 remote starts before
needing to key start the vehicle to allow additional remote start activations. Please refer
to the vehicle's owner manual for the specific limitations of your vehicle.
• Vehicle must be locked and armed for at least 45 seconds before remote starting.
• The remote start system will not work in the following conditions:
� The ignition is on.
� The alarm system is triggered.
� The doors/hood are open.
� The transmission is not in Park (P).
14:36
� The vehicle battery voltage is too low.
� The service engine light is on.
14:36
Remote Start Ready (RSR)
Remote Start Ready (RSR) is a function that enables the interface module
to remote start the vehicle completely on its own. Consequently, there is
no need for an aftermarket or an OEM remote starter in order to start the
vehicle from a distance.
3x OEM Lock Remote Start Activation
This solution includes the option to remote start your vehicle by pressing the Lock button
Key IN
START
START
3 times consecutively. If your vehicle allows the OEM remote to remain active while the
engine is running, you may shut down your remote starter by pressing the Lock button 3
times once more.
Note: The range offered by OEM remotes is limited and typically requires you to be within
eyesight of the vehicle to control it.