- ページ 7

電動工具 Clarke 4500633のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 4500633 17 ページ。

COMPONENT IDENTIFICATION

1. 1/2" Square Socket Drive

2. Battery Release Button

3. Forward/Reverse Switch-bar

4. Battery Pack

5. Trigger

6. Wrist Strap

7. Hand Grip

NOTE: The CIR450C charger is not

compatible with the

earlier CIR450/450B

battery.

1. The new battery pack will require

charging before use.

2. Squeeze the battery release buttons on

either side of the battery pack and pull

gently down to disengage the battery

pack from the machine as in Fig 1.

3. Plug the charger into a 230v (mains)

power supply and switch ON.

4. Insert the battery pack into the battery

charger, as shown in Fig 2, noting that it

will only fit one way.

• The green POWER ON light will

illuminate to show the unit is

connected to the mains supply.

5. Press the "SET" button and the green

light will turn off ,the RED charging light

will illuminate and charging will begin.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]