Clarke 4500633 Инструкции по эксплуатации и техническому обслуживанию - Страница 7
Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и техническому обслуживанию для Электроинструмент Clarke 4500633. Clarke 4500633 17 страниц.
Печатать страницу
COMPONENT IDENTIFICATION
1. 1/2" Square Socket Drive
2. Battery Release Button
3. Forward/Reverse Switch-bar
4. Battery Pack
5. Trigger
6. Wrist Strap
7. Hand Grip
NOTE: The CIR450C charger is not
compatible with the
earlier CIR450/450B
battery.
BATTERY CHARGING
1. The new battery pack will require
charging before use.
2. Squeeze the battery release buttons on
either side of the battery pack and pull
gently down to disengage the battery
pack from the machine as in Fig 1.
3. Plug the charger into a 230v (mains)
power supply and switch ON.
4. Insert the battery pack into the battery
charger, as shown in Fig 2, noting that it
will only fit one way.
• The green POWER ON light will
illuminate to show the unit is
connected to the mains supply.
5. Press the "SET" button and the green
light will turn off ,the RED charging light
will illuminate and charging will begin.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7