- ページ 10

電動工具 Clarke Contractor CON750のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke Contractor CON750 20 ページ。 Contractor jigsaw
Clarke Contractor CON750 にも：取扱説明書 (17 ページ)

ページを印刷する

5. To start the jigsaw, squeeze the

trigger. Wait until the blade is running

at speed before attempting to cut

the workpiece.

6. Maintain the saw at constant speed

by pressing in the lock-on button.

• You can then release your finger

pressure on the trigger.

7. To stop the jigsaw if the lock-on

button is used, squeeze the trigger

fully in, then release it and the motor will stop.

USING THE JIGSAW

1. Place the sole-plate on the workpiece and squeeze the trigger to run the

jigsaw up to its working speed before letting the blade touch the cut line.

To make your cut, move the saw slowly forward along the cutting line.

2. Adjust the speed controller to suit the material being cut using the

following suggested settings as a starting point. However, the optimum

speed will be determined with practice.

Plastic

Steel

Hardboard

Ceramic, aluminium, non-ferrous metals

Timber, plywood & chipboard

4. Take extra care when cutting curves - move the blade slowly to avoid

stress on the blade.

5. When sawing, hold the jigsaw in front of you but do not put unnecessary

pressure on the blade and avoid applying lateral pressure.

6. Let the blade work through the workpiece, ensuring the sole plate is flush

with the workpiece.

ADJUSTING THE PENDULUM

The pendulum moves the blade away

from the cut on the down (non-cutting)

stroke. The pendulum can be particularly

useful when cutting thicker, denser

materials.

1. Adjust the control to suit the material

being worked, and try to balance its

use with adjustments to the speed of

the saw to achieve the optimum

setting for the job.

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

1 - 3

2 - 4

3 - 4

3 - 6

4 - 6