- ページ 11

電動工具 Clarke Contractor CON750のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke Contractor CON750 20 ページ。 Contractor jigsaw
Clarke Contractor CON750 にも：取扱説明書 (17 ページ)

ページを印刷する

2. Adjust the pendulum control to suit the material being cut using the

following suggested settings as a starting point if required. Do not use the

pendulum action for cutting ceramics or metals.

Ceramics

Metal

Plywood, plastics

Timber, fibreboard & chipboard

CUTTING DIFFERENT MATERIALS

CUTTING WOOD

Check that any previously used timber being sawn does not contain any nails

or other metal objects which would damage the blade.

CUTTING METAL

Having chosen a suitable blade for cutting metal it is recommended to

lubricate the material and blade with cutting oil to prevent the tool from

overheating. Support the workpiece with wooden blocks on either side.

ADJUSTING THE SOLE PLATE

The sole-plate is adjustable so that bevels of up to 45° may be cut. Loosen the

two socket head screws under the sole-plate before adjusting it to the

desired angle and re-tightening the screws.

Socket head

screws

MAINTENANCE

CLEANING

1. To ensure constant air circulation, always keep air vents clear of

blockages, (use compressed air to clean the machine if possible).

2. After use, clean all dust and wood chippings from the jigsaw.

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

1 - 2

1 - 3