- ページ 6

電動工具 Clarke Metalworker CL251MHのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke Metalworker CL251MH 16 ページ。 Metalworker milling/drilling attachment

ELECTRICAL CONNECTIONS

The machine is fitted with a power cable with a plug attached. The plug should be

connected to the socket at the rear of the Headstock of the CL250M Lathe.

This appliance is fitted with a plug which is moulded on to the electric

The plug must be thrown away if it is cut from the electric cable. There is a

danger of electric shock if it is subsequently inserted into a socket outlet.

If the plug is damaged, a replacement cable complete with plug must be fitted.

These are available form you Clarke dealer (see parts list).

It will be necessary to disassemble the motor in order to fit the replacement

cable. Please note that the wires in the mains lead are coloured in accordance

with the following code;

Green & Yellow

DO NOT attempt to fit a replacement cable unless you are fully familiar with

electrical systems. Consult a qualified technician, or your nearest Clarke dealer.

WARNING! THIS APPLIANCE MUST BE EARTHED

IMPORTANT!

cable (i.e. non-rewirable) please note:

Blue

Brown

WARNING!

Earth

Neutral

Live