ページを印刷する
ALE
2.1.1
Defining the position of the system
After unpacking the printer and checking that the contents correspond to your order and
to the delivery note, the first operation will be to set the position of the print-head on the
conveyor. The correct print-head position can be determined using Codex and its 3D
capabilities (Fig. 8). Please refer to the Codex manual for details.
You must know that the system must be adjusted so that the surfaces to be printed don't
touch the print-head, and are at a maximum distance of 3mm (Fig. 9).
Evaluate, then set precisely the product distance several times before "inking up" the
printer and printing messages ! We strongly recommend fitting product guide rails.
Coral144 Operator Manual
Design • Print • Trace
Fig. 8: CodeX 3D view with a 72mm print-head
03/12/2010
5