ALE Coral 144 운영자 매뉴얼 - 페이지 9

{카테고리_이름} ALE Coral 144에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALE Coral 144 18 페이지.

ALE

2.1.1

Defining the position of the system

After unpacking the printer and checking that the contents correspond to your order and

to the delivery note, the first operation will be to set the position of the print-head on the

conveyor. The correct print-head position can be determined using Codex and its 3D

capabilities (Fig. 8). Please refer to the Codex manual for details.

You must know that the system must be adjusted so that the surfaces to be printed don't

touch the print-head, and are at a maximum distance of 3mm (Fig. 9).

Evaluate, then set precisely the product distance several times before "inking up" the

printer and printing messages ! We strongly recommend fitting product guide rails.

Coral144 Operator Manual

Design • Print • Trace

Fig. 8: CodeX 3D view with a 72mm print-head

03/12/2010