- ページ 6

電動工具 Clarke Strong-Arm CSA15FのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke Strong-Arm CSA15F 12 ページ。 15 tonne shop press

OPERATION

Before Use

Visually inspect the shop press for damaged, loose or missing parts.

If any parts are damaged or missing, DO NOT use the shop press, contact your

Clarke dealer for repair or servicing.

Replace any worn or defaced warning labels, these are available from your

Clarke dealer

Setting the bed height

1. Remove any arbor plates (8)

from the work bed (9).

2. Hold the work bed securely with

two hands and lift it off of the

support pins. Place the work

bed carefully on the floor.

3. Inserting the support pins (10)

into the appropriate holes in the

main frame at the required

height.

Make sure that the support pins (10) are level and secured using the clevis pins

supplied (25).

4. Carefully place the work bed onto the support pins and replace the arbour

plates.

Support

Clevis

Fig. 6