Clarke Strong-Arm CSA15F Kullanım ve Bakım Talimatları - Sayfa 6
Elektrikli Alet Clarke Strong-Arm CSA15F için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. Clarke Strong-Arm CSA15F 12 sayfaları. 15 tonne shop press
Sayfayı Yazdır
OPERATION
Before Use
1.
Visually inspect the shop press for damaged, loose or missing parts.
If any parts are damaged or missing, DO NOT use the shop press, contact your
Clarke dealer for repair or servicing.
2.
Replace any worn or defaced warning labels, these are available from your
Clarke dealer
Setting the bed height
1. Remove any arbor plates (8)
from the work bed (9).
2. Hold the work bed securely with
two hands and lift it off of the
support pins. Place the work
bed carefully on the floor.
3. Inserting the support pins (10)
into the appropriate holes in the
main frame at the required
height.
Make sure that the support pins (10) are level and secured using the clevis pins
supplied (25).
4. Carefully place the work bed onto the support pins and replace the arbour
plates.
Support
Pin
6
Clevis
Pin
Fig. 6