- ページ 8

洗濯機 Zanussi FE 1004/6のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi FE 1004/6 22 ページ。

ページを印刷する

Use

Control panel

1 ON/OFF button

Press this button to switch the washing machine on.

Press the ON/OFF button again to switch the

machine off.

2 MAINS-ON light

This light is connected to the ON/OFF button. It

lights up when you press the button, and goes out

when you press it again.

3 FABRIC button

Press this button repeatedly to select the programme

on the basis of the type of laundry to be washed. The

light relevant to the selected programme will light up.

The washing machine will propose a temperature.

4 TEMPERATURE button

Press this button repeatedly to increase or decrease

the temperature, if you want your laundry to be washed

at a temperature different from the one proposed by

the washing machine. The relevant light will light up.

Maximum temperatures are 90°C for cotton, 60°C for

synthetic fabrics, 40°C for delicate fabrics and

wool/handwash.

By selecting position

cold water. To be used for extremely delicate items,

such as curtains.

90ºC

12 h

60ºC

8 h

40ºC

6 h

30ºC

4 h

the machine will wash with

2 h

Important!

By depressing TEMPERATURE

START

simultaneously, the acoustic signal is suppressed in

the following cases:

• when depressing the buttons

• when an incorrect option selection is made

• at the end of the programme

5 DELAY START button

This button makes it possible to delay the starting of

the washing programme by 12, 8, 6, 4 and 2 hours.

The delay you have selected is indicated by the

coming on of the corresponding light.

You must select this option after you have set the

programme and before you press the START/

PAUSE button

You can cancel or modify the delay time at any

moment, before you press the START/PAUSE

button. If you have already pressed the

START/PAUSE button, and you wish to cancel the

delay time, proceed as follows:

• set the washing machine to PAUSE by pressing

the START/PAUSE button;

• press the DELAY button once, the light relevant to

the selected delay goes off;

• press the START/PAUSE button again.

Important!

• The selected delay can be changed only after

selecting the washing programme again.

• The door will be locked throughout the delay time

If you need to open the door, you must first set the

washing machine to PAUSE by pressing the

START/PAUSE button. After closing the door, press

the START/PAUSE button again.

FE 1004

buttons

and DELAY