- ページ 9

洗濯機 Zanussi FE 1004/6のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi FE 1004/6 22 ページ。

ページを印刷する

OPTIONS

button

Press this button to select one of the following

options:

• PREWASH

: select this option if you wish your

laundry to be prewashed before the main wash

(not available for wool/handwash).

The prewash ends with a short spin at 650 rpm in

programmes for cotton and synthetic fabrics,

whereas in the programme for delicate fabrics the

water is only drained.

• ECONOMY

: this option can be selected only

for cottons and synthetics lightly or normally

soiled with a temperature of 40°C or higher. The

washing time will be prolonged and the washing

temperature will be reduced. It allows you to save

energy and to achive a good performance of

washing at the same time

• SPIN SPEED REDUCTION

option the final spin speed is reduced as follows:

- from 1000 to 450 rpm in programmes for cotton

and linen

- from 900 to 450 rpm in programmes for

synthetics, wool and handwash

- from 700 to 450 rpm in programmes for

delicates.

7 START/PAUSE button

This button has two functions:

• Start: after you have selected the desired

programme and options, press this button to start

the washing machine. The light above the button

will stop flashing and remain lit.

• Pause: when you press this button again, the

programme in progress is interrupted. The light

above the button will start flashing. To restart the

programme, press the button again.

Important! You must set the washing machine to

PAUSE before you make any change in the

programme in progress.

8 SKIP/RESET button

At the end of a programme, you must press this

button once or repeatedly, in order to clear the

contents of the memory; otherwise, the next time

you switch the washing machine on, the audible

warning signals relevant to the end of the previous

cycle will be given.

You can also press the RESET button to exclude

one or several phases of the programme which is

running, as indicated below.

- set the washing machine to PAUSE by

- press the RESET button once or several

Example:

: by selecting this

This button allows you also to select special

programmes, such as RINSES, SPIN and DRAIN.

• If the machine is already switched on because it

has just performed a washing programme, proceed

as follows:

- depress RESET once or repeatedly to cancel the

- select the type of fabric by means of the relevant

- select the special programme:

pressingthe START/PAUSE button (the relevant

light will flash);

times, until the required phase(s) is(are) cancelled

(the light next to the symbol of the phase(s) will go

out).

previously performed programme (all the phase

indicator lights must be off);

button;

• RINSES

AND SPIN

Depress RESET once, the pilot light

goes out.

• SPIN

Depress RESET twice, the pilot lights WASH

and RINSES

go out.

•DRAIN

Depress RESET three times, the pilot lights

WASH

, RINSES

and only

(drain) goes on.

In this case, the spin

(at the speed provided

for the selected type of

fabric) will be

performed.

(WASH)

and SPIN

go out