- ページ 10

洗濯機 Zanussi FE 4000のPDF 使用上の注意をオンラインで閲覧またはダウンロードできます。Zanussi FE 4000 36 ページ。 Front-load washing machine
Zanussi FE 4000 にも：取扱説明書 (36 ページ)

Important: Before connecting up the

machine to new pipework or tõ pipework ,

that has not been used for some time,

run off a reasonable amount of water to

flush out any debris that may have

collected in the pipes.

Whether discharging into a sink or a

drainpipe check that the end of the drain

hose is neither too high nor too low. The

top of the curve in the hose's end should

be no more than 85cm (34") and no less

than 50cm (20") above floor level

(figure 4).

500mm

min

850mm max

Finally, make sure that with the machine

in position, the drain hose is not

obstructed, blocked or bent so sharply

that water cannot flow freely.

The electrical connections

WARNING: THIS APPLIANCE MUST

BE EARTHED

The manufacturer declines any liability

should this safety measure not be

observed.

If the plug that is fitted to your

appliance is not suitable for your socket

outlet, it must be cut off and the

appropriate plug fitted.

The cut off plug should be disposed of to

prevent the hazard of electric shocks in

case it should be plugged into a 13 Amp

socket in another part of your home.