- ページ 14

洗濯機 Zanussi FL 1090のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi FL 1090 26 ページ。 Front-loading washing machine

11 DELAY (INICIO DIFERIDO) button

This button makes it possible to delay the starting of

the programme by up to 23 hours. The delay you

have selected is shown on the display for about 3

seconds; afterwards, the duration of the programme

reappears.

If the SOAK button has been pressed the selected

delay will correspond to the soak time. If no delay

time is selected the programme will last about 30

minutes.

You must select this option after you have set the

programme and before you press the

START/PAUSE button.

The time value shown on the display will decrease

by one unit every hour.

You can change the delay time at any moment,

before you press the START/PAUSE button.

If you have already pressed the START/PAUSE

button, and you wish to cancel the delay time,

proceed as follows:

• set the washing machine to PAUSE by pressing the

START/PAUSE button;

• press twicw the DELAY button until the display

shows

and then press the START.PAUSE again.

To change the delay time, after the programme had

started, you have to set the programme again.

Important!

The door will be locked throughout the delay time

(DOOR LOCKED light lit).

If you need to open the door, you must first set the

washing machine to PAUSE by pressing the

START/PAUSE button. After you have closed the

door, press the START/PAUSE button again.

12 Programme phase indicator lights

When you select a programme, the lights relevant to

the phases that form the programme light up.

After you have started the programme, only the light

relevant to the phase that is currently being carried

out will remain lit.