- ページ 9

食器洗い機 Zanussi DCS 383のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi DCS 383 12 ページ。 Dishwasher dcs 383
Zanussi DCS 383 にも：取扱説明書 (12 ページ)

In the event of a fault

• If water leaks from the machine

There is always a certain risk of leakages in any machine connected to a water supply, no matter what

water safety features it may have. Therefore it is advisable always to turn off the water supply tap when

the machine is not in use.

Check the following before calling a repairman:

• Dishwasher fails to start

• Water not discharged at end of cycle

• Dishes not washed satisfactorily

• Dishes dull or streaky

Never attempt to repair the dishwasher yourself.

Repairs carried our by unauthorised or inexperienced

persons can cause injury or other machine faults.

• Turn off the water supply tap or stopcock imme-

diately and isolate the machine from the electrical

supply by removing the plug from the wall socket.

• Check that all seals, seams and connections are

watertight.

• Is the door properly closed?

• Is the water tap or stopcock on?

• Is the dishwasher plugged in?

• Has the fuse blown?

• Did you open the door before the light went out and

the cycle ended?

• Are the strainers/filters clogged?

• Is the discharge hose blocked?

• Has anything prevented the spray arm from rotating?

• Were the dishes packed too close together?

• Did you use enough detergent?

(Correct amount: about 1-2 tablespoons/load)

• Clean the strainers/filters!

• Check that the rinse conditioner dispenser is not empty.

• Check that the spray arm holes are not clogged.

• Are the strainers/filters fitted correctly in place?

• Limescale from hard water has probably formed in

the machine and is being deposited on the dishes.

Buy a limescale remover and follow the instructions

on the package to descale the dishwasher.

- 9 -