Zanussi DCS 383 Folheto de instruções - Página 9
Procurar online ou descarregar pdf Folheto de instruções para Máquina de lavar loiça Zanussi DCS 383. Zanussi DCS 383 12 páginas. Dishwasher dcs 383
Também para Zanussi DCS 383: Folheto de instruções (12 páginas)
Imprimir página
In the event of a fault
Trouble shooting list
• If water leaks from the machine
There is always a certain risk of leakages in any machine connected to a water supply, no matter what
water safety features it may have. Therefore it is advisable always to turn off the water supply tap when
the machine is not in use.
Check the following before calling a repairman:
• Dishwasher fails to start
• Water not discharged at end of cycle
• Dishes not washed satisfactorily
• Dishes dull or streaky
Never attempt to repair the dishwasher yourself.
Repairs carried our by unauthorised or inexperienced
persons can cause injury or other machine faults.
• Turn off the water supply tap or stopcock imme-
diately and isolate the machine from the electrical
supply by removing the plug from the wall socket.
• Check that all seals, seams and connections are
watertight.
• Is the door properly closed?
• Is the water tap or stopcock on?
• Is the dishwasher plugged in?
• Has the fuse blown?
• Did you open the door before the light went out and
the cycle ended?
• Are the strainers/filters clogged?
• Is the discharge hose blocked?
• Has anything prevented the spray arm from rotating?
• Were the dishes packed too close together?
• Did you use enough detergent?
(Correct amount: about 1-2 tablespoons/load)
• Clean the strainers/filters!
• Check that the rinse conditioner dispenser is not empty.
• Check that the spray arm holes are not clogged.
• Are the strainers/filters fitted correctly in place?
• Limescale from hard water has probably formed in
the machine and is being deposited on the dishes.
Buy a limescale remover and follow the instructions
on the package to descale the dishwasher.
- 9 -