- ページ 5
食器洗い機 Zanussi DCS 383のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi DCS 383 12 ページ。 Dishwasher dcs 383
Zanussi DCS 383 にも： 取扱説明書 (12 ページ)
ページを印刷する
The control panel and programmes
All figures are nominal and vary for example due to temperature variations on the inlet water.
The figures apply to washing up 5 IEC-settings.
1
On/Off-button
Press the button in order to start the required
programme.
2
Temperature selector
Press the button in for 55°C.
3
Temperature selector
Press the button in for 65°C.
4
Programme selector
Turn the programme selector clockwise to the
programme required and press in the On/Off button.
To isolate the dishwasher from the mains completely,
unplug it from the wall socket.
During the water heating process, the timer
is standing still.
5
Indicator lamp
While the programme is in progress, the operating
lamp is lit and it goes out when the programme is ready.
6
Salt indicator lamp
The operating lamp indicates when the salt needs to be
replenished. The lamp may remain lit for one or more
programmes after replenishment, which is fully normal.
1
2
3
6
5
Door lock
Press the handle down and open the door. Avoid opening
the door while the machine is running.
If the door is opened and is put standing ajar after a
completed programme the dishes will dry faster.
Programmes
Prerinse is used if you want to wait until you have a full
load. This cycle rinses the load and keeps it moist, making
the main wash easier later on. No detergent should be used.
It does not matter which temperature you select.
Intensive for loads which have heavily dried-on food
remnants and for those which are heavily soiled.
Normal for normal soiled loads, which do not need any
rinse off.
Rinse for warm or hot rinsing for dishes (65°C) or
glasses (55°C).
Plate warming is used for warming dinner plates etc.
prior to serving a meal.
- 5 -
4