- ページ 23

食器洗い機 Zanussi ZDTS 101のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZDTS 101 28 ページ。 Zanussi dishwasher user manual

WARNING!

The electrical cable for the safety valve is in the

double-walled water inlet hose and is live.

Therefore do not immerse the water inlet hose

or the safety valve in water.

Take care when installing the water inlet hose

. Place the water inlet hose in such a way that

it is always lower than the bottom edge of the

safety valve.

Drain hose

Connect drain hose to the

sink.

If you use a drain hose extension the total

length should not be longer than 4 metres.

Likewise the internal diameter of the couplings

used for connections to the waste outlet must

be no smaller than the diameter of the hose

provided.

Required height: 30 to 100

cm above bottom of the

dishwasher.

If the water inlet hose or the safety valve is

damaged, remove the mains plug immediately.

CAUTION!

A water inlet hose with safety valve MUST only

be replaced by your local Service Force Centre.

Ensure that the hoses are

not kinked, crushed or en-

tangled.

When connecting the

drain hose to an under

sink trap spigot, the entire

plastic membrane (A)

must be removed. Fail-

ure to remove all the mem-

brane will result in food

particles building up over

time eventually blocking

the dishwasher drain hose

spigot.