Zanussi ZDTS 101 Kullanıcı Kılavuzu - Sayfa 23

Bulaşık Makinesi Zanussi ZDTS 101 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZDTS 101 28 sayfaları. Zanussi dishwasher user manual

Sayfayı Yazdır

WARNING!

The electrical cable for the safety valve is in the

double-walled water inlet hose and is live.

Therefore do not immerse the water inlet hose

or the safety valve in water.

Take care when installing the water inlet hose

. Place the water inlet hose in such a way that

it is always lower than the bottom edge of the

safety valve.

Drain hose

Connect drain hose to the

sink.

If you use a drain hose extension the total

length should not be longer than 4 metres.

Likewise the internal diameter of the couplings

used for connections to the waste outlet must

be no smaller than the diameter of the hose

provided.

Required height: 30 to 100

cm above bottom of the

dishwasher.

If the water inlet hose or the safety valve is

damaged, remove the mains plug immediately.

CAUTION!

A water inlet hose with safety valve MUST only

be replaced by your local Service Force Centre.

Ensure that the hoses are

not kinked, crushed or en-

tangled.

When connecting the

drain hose to an under

sink trap spigot, the entire

plastic membrane (A)

must be removed. Fail-

ure to remove all the mem-

brane will result in food

particles building up over

time eventually blocking

the dishwasher drain hose

spigot.