- ページ 6

食器洗い機 Zanussi ZSF 6161 SのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZSF 6161 S 28 ページ。

Zanussi ZSF 6161 S ユーザーマニュアル

Setting mode

The appliance is in setting mode when the On/Off in-
dicator light illuminates and all programme lights are
off.
Always remember that when performing the following
operations:
• selecting a washing programme
• setting the water softener
• activating/deactivating the rinse aid dispenser
the appliance MUST be in setting mode.
Function buttons
Digital display
IMPORTANT!
Select the washing programme and the delay
start with the door slightly opened. The start of
the programme or the countdown of the delay
6
IMPORTANT!
If a programme light is illuminated, the last performed
programme is still set.
In this case the programme has to be cancelled:
Simultaneously press and hold the two Cancel buttons
(B and C) until all the programme lights are off. The
programme has been cancelled and the machine is
now in setting mode.
In addition to the dishwashing programme selection,
the following functions can also be set with the help of
these buttons.
– the setting of the water softener,
– the cancelling of a programme in progress.
– the activation/deactivation of the rinse aid dispenser
In the digital display is indicated:
– the level of hardness to which the water softener is
set,
– the approximate remaining time of the running pro-
gramme,
– activation/deactivation of the rinse aid dispenser,
– the end of the programme (a zero is visible),
– the countdown of the delay start,
– fault codes concerning malfunction of the appliance.
start will occur only after the closure of the door.
Until that moment it is possible to modify the set
made.