Zanussi ZSF 6161 S 사용자 설명서 - 페이지 6

{카테고리_이름} Zanussi ZSF 6161 S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZSF 6161 S 28 페이지.

Setting mode

The appliance is in setting mode when the On/Off in-

dicator light illuminates and all programme lights are

off.

Always remember that when performing the following

operations:

• selecting a washing programme

• setting the water softener

• activating/deactivating the rinse aid dispenser

the appliance MUST be in setting mode.

Function buttons

Digital display

IMPORTANT!

Select the washing programme and the delay

start with the door slightly opened. The start of

the programme or the countdown of the delay

IMPORTANT!

If a programme light is illuminated, the last performed

programme is still set.

In this case the programme has to be cancelled:

Simultaneously press and hold the two Cancel buttons

(B and C) until all the programme lights are off. The

programme has been cancelled and the machine is

now in setting mode.

In addition to the dishwashing programme selection,

the following functions can also be set with the help of

these buttons.

– the setting of the water softener,

– the cancelling of a programme in progress.

– the activation/deactivation of the rinse aid dispenser

In the digital display is indicated:

– the level of hardness to which the water softener is

set,

– the approximate remaining time of the running pro-

gramme,

– activation/deactivation of the rinse aid dispenser,

– the end of the programme (a zero is visible),

– the countdown of the delay start,

– fault codes concerning malfunction of the appliance.

start will occur only after the closure of the door.

Until that moment it is possible to modify the set

made.