- ページ 8

食器洗い機 Zanussi ZSFN132W1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZSFN132W1 25 ページ。

ページを印刷する

1)2)

Programme

1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quan-

tity of dishes and the degree of soil can change the values.

2) The values for programmes other than ECO are indicative only.

INFORMATION FOR TEST INSTITUTES

To receive the necessary information for conducting performance tests (e.g. according to: BS EN60436 ),

send an email to:

[email protected]

In your request, include the product number code (PNC) from the rating plate.

For any other questions regarding your dishwasher, refer to the service book provided with your appliance.

SETTINGS

PROGRAMME SELECTION MODE AND

USER MODE

When the appliance is in programme selection

mode, you can set a programme and enter user

mode.

Settings available in the user mode:

•

The level of water softener according to the

water hardness.

•

Activation or deactivation of the rinse aid empty

notification.

•

The level of rinse aid according to the required

dosage.

•

Activation or deactivation of the AirDry.

The saved settings remain valid until you

change them again.

How to set the programme selection mode

The appliance is in programme selection mode

when the on/off indicator is on and

flashes.

Water hardness

German degrees

French degrees

(°dH)

47 - 50

43 - 46

37 - 42

29 - 36

Water

(l)

3.8

indicator

mmol/l

(°fH)

84 - 90

8.4 - 9.0

76 - 83

7.6 - 8.3

65 - 75

6.5 - 7.5

51 - 64

5.1 - 6.4

Energy

(kWh)

0.014

After activation, the appliance is in programme

selection mode by default. If not, set the

programme selection mode the following way:

Press and hold

until the appliance is in

programme selection mode.

THE WATER SOFTENER

The water softener removes minerals from the water

supply, which would have a negative effect on the

washing results and on the appliance.

The higher the content of these minerals, the harder

your water is. Water hardness is measured in

equivalent scales.

The water softener should be adjusted according to

the hardness of the water in your area. Your local

water authority can advise you on the hardness of

the water in your area. Set the right level of the

water softener to assure good washing results.

Clarke de-

mg/l (ppm)

grees

835 - 904

58 - 63

755 - 834

53 - 57

645 - 754

46 - 52

505 - 644

36 - 45

Duration

(min)

Water softener level