- ページ 11

冷凍庫 Zanussi ZBF22456SVのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZBF22456SV 17 ページ。

Zanussi ZBF22456SV ユーザーマニュアル
A
A - green and yellow: Earth
C - brown: Live
D - blue: Neutral
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
1. Connect the wire coloured green and yellow to
the terminal marked either with the letter "E" or
by the earth symbol
yellow.
2. Connect the wire coloured blue to the terminal
either marked with the letter "N" or coloured
black.
3. Connect the wire coloured brown to the
terminal either marked with the "L" or coloured
red.
4. Check that no cut, or stray strands of wire is
present and the cord clamp (E) is secure over
the outer sheath.

TECHNICAL DATA

Dimensions of the recess
Height
Width
Depth
Rising time
Voltage
Frequency
B
C
D
E
or coloured green and
Make sure the electricity supply voltage is the
same as that indicated on the appliance rating
plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp fuse (B).
In the event of having to change the fuse in the plug
supplied, a 13 amp ASTA approved (BS 1362)
fuse must be used.
WARNING! A cut off plug inserted
into a 13 amp socket is a serious
safety (shock) hazard. Ensure that it is
disposed of safely.

VENTILATION REQUIREMENTS

The airflow behind the appliance must be sufficient.
5 cm
CAUTION! Refer to the assembly
instructions for the installation.
mm
mm
mm
Hours
Volts
Hz
min.
2
200 cm
min.
200 cm
1780
560
550
24
230 - 240
50
2
11