- ページ 16

換気フード Zanussi ZHC4284のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZHC4284 44 ページ。 Zanussi chimney hood product brochure
Zanussi ZHC4284 にも：特徴 (5 ページ)

Drilling the Ceiling/Support Shelf

• Use a plumb line to mark the centre of the hob on

the ceiling/support shelf.

• Place the drilling template 21 provided on the ceiling/

support shelf, making sure that the template is in the

correct position by lining up the axes of the template

with those of the hob.

• Mark the centres of the holes in the template.

• Drill the holes at the points marked:

• For concrete ceilings, drill for plugs appropriate to

the screw size.

• For hollow brick ceilings with wall thickness of 20

mm: drill ø 10 mm (immediately insert the Dowels

not provided).

• For wooden beam ceilings, drill according to the

wood screws used.

• For wooden shelf, drill ø 7 mm.

• For the power supply cable feed, drill ø 10 mm.

• For the air outlet (Ducted Version), drill according

to the diameter of the external air exhaust duct

connection.

• Insert two screws of the following type, crossing them

and leaving 4-5 mm from the ceiling:

• For concrete ceilings, use the appropriate plugs

for the screw size (not provided).

• For Cavity ceiling with inner space, with wall thi-

ckness of approx. 20 mm, Screws not provided.

• For wooden beam ceilings, use 4 wood screws

(not provided).

• For wooden shelf, use 4 screws with washers and

nuts (not provided)

INSTALLING THE COOKER HOOD