- ページ 15

エアーコンプレッサー Clarke PPH10NDのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke PPH10ND 17 ページ。 Air compressor
Clarke PPH10ND にも：取扱説明書 (10 ページ), 取扱説明書 (20 ページ)

ページを印刷する

Unusual noise from

Bolts loose.

compressor.

Flywheel loose.

Unit installed on an unsuitable

base.

Bearings, piston rings or cylinder

worn.

Valve broken.

Compressor

Insufficient ventilation.

becomes too hot.

Oil level too low (check 2 or 3

times after stopping).

Fault in valves (machine not

stopping).

Blown head gasket (machine

not stopping).

Dirt on cooling fins or suction

filter.

Unit working at too high a

pressure.

Not fully unloading

Non-return valve partly blocked.

Compressor being

overworked and running

continuously.

Tighten bolts.

Tighten flywheel.

Move unit to a more solid base.

Replace worn parts or change

compressor pump.

Change valve parts.

See that sufficient air is supplied to

flywheel or fan of compressor and

that hot air is properly vented.

Fill with oil – see Page 10.

Check, clean/replace.

Check and replace gasket.

Clean cooling fins and suction

filter.

Reset to correct working pressure

detailed on unit.

Check pressure unloading genie,

adjust if necessary, check

valve(s).

Clean or that out non return

valve.

Connect to a supplementary

compressor or install a larger

model.

- 16 -