- ページ 7

水ポンプ Clarke 7230696のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 7230696 13 ページ。 750w submersible pump with folding base and float switch

MAINTENANCE

WARNING: BEFORE CHECKING THE CONDITION OF THE PUMP, ENSURE IT

IS UNPLUGGED FROM THE MAINS SUPPLY. IF THE UNIT IS HARD WIRED,

ENSURE THE CIRCUIT BREAKER IS OPEN.

This pump should require no maintenance other than regular cleaning.

If the pump shows signs of wear or damage, contact your CLARKE dealer.

CLEANING

1. Check the pump installation regularly to ensure the water inlet is clear of

leaves or other debris.

2. Take extra care to remove any debris from around the impeller.

NOTE: Do not attempt to repair the pump yourself, as you may damage the

waterproof seal and invalidate your guarantee. Repairs must be

carried out by your CLARKE dealer, or contact the CLARKE Service

Department, on 020 8988 7400.

STORAGE

When the pump is not being used for extended periods, clean and dry it

thoroughly and store in indoors. if the pump is left in water, it must be run at

least once a week to prevent it from seizing up.

Voltage

Outlet Thread Diameter

Power

Maximum Head Height

Maximum Depth

Maximum Flow

Maximum Water Temperature

Maximum Particle Size

Weight

Cable Length

Dimensions (D x W x H)

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

230V~50Hz

1½" BSP

750W

8 m

7 m

217 l/min

30 mm

5.1 kg

10 m

156 x 163 x 330 mm