Clarke 7230696 Manual de Instruções de Operação e Manutenção - Página 7
Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Bomba de água Clarke 7230696. Clarke 7230696 13 páginas. 750w submersible pump with folding base and float switch
Imprimir página
MAINTENANCE
WARNING: BEFORE CHECKING THE CONDITION OF THE PUMP, ENSURE IT
IS UNPLUGGED FROM THE MAINS SUPPLY. IF THE UNIT IS HARD WIRED,
ENSURE THE CIRCUIT BREAKER IS OPEN.
This pump should require no maintenance other than regular cleaning.
If the pump shows signs of wear or damage, contact your CLARKE dealer.
CLEANING
1. Check the pump installation regularly to ensure the water inlet is clear of
leaves or other debris.
2. Take extra care to remove any debris from around the impeller.
NOTE: Do not attempt to repair the pump yourself, as you may damage the
waterproof seal and invalidate your guarantee. Repairs must be
carried out by your CLARKE dealer, or contact the CLARKE Service
Department, on 020 8988 7400.
STORAGE
When the pump is not being used for extended periods, clean and dry it
thoroughly and store in indoors. if the pump is left in water, it must be run at
least once a week to prevent it from seizing up.
SPECIFICATIONS
Voltage
Outlet Thread Diameter
Power
Maximum Head Height
Maximum Depth
Maximum Flow
Maximum Water Temperature
Maximum Particle Size
Weight
Cable Length
Dimensions (D x W x H)
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
230V~50Hz
1½" BSP
750W
8 m
7 m
217 l/min
o
35
C
30 mm
5.1 kg
10 m
156 x 163 x 330 mm
7