- ページ 14
カー・ビデオ・システム Directed Video HVM500のPDF オーナーズ・インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Directed Video HVM500 15 ページ。 Directed video headrest video monitor owners guide hvm500
ページを印刷するWiring Guide
WIRING PRECAUTIONS
Read all wiring information before attempting to
install this monitor.
I
Use only solder and tape or quality solder-
less connectors when terminating wires.
Incorrect or poor connections may cause
damage to the monitor or the vehicle.
I
Disconnect the ground wire from the bat-
tery or remove the fuses for any impacted
circuits before making any connections.
WIRE AND AV CONNECTORS
1.
Monitor DIN Cable
2.
DIN-to-RCA Cable
3.
IR Remote Connector
4.
Audio Input RCA (RED)
5.
Audio Input RCA (WHITE)
14
I
Route all wires and cables away from areas
where they could be pinched, punctured.
or chafe against sharp metal causing short
circuits.
I
All wires should be properly loomed and
fused at the source.
I
It is recommended that you have your
authorized retailer install this monitor.
6.
Video Input RCA (YELLOW)
7.
Black Wire - Connect to chassis ground.
8.
Red Wire - Connect to a fused (+) 12 volt.
ignition accessory wire that turns off with
the key.
© 2001 Directed Electronics, Inc.