Directed Video HVM500 Installatiehandleiding voor de eigenaar - Pagina 14

Blader online of download pdf Installatiehandleiding voor de eigenaar voor {categorie_naam} Directed Video HVM500. Directed Video HVM500 15 pagina's. Directed video headrest video monitor owners guide hvm500

Pagina afdrukken

Wiring Guide

WIRING PRECAUTIONS

Read all wiring information before attempting to
install this monitor.
I
Use only solder and tape or quality solder-
less connectors when terminating wires.
Incorrect or poor connections may cause
damage to the monitor or the vehicle.
I
Disconnect the ground wire from the bat-
tery or remove the fuses for any impacted
circuits before making any connections.

WIRE AND AV CONNECTORS

1.
Monitor DIN Cable
2.
DIN-to-RCA Cable
3.
IR Remote Connector
4.
Audio Input RCA (RED)
5.
Audio Input RCA (WHITE)
14
I
Route all wires and cables away from areas
where they could be pinched, punctured.
or chafe against sharp metal causing short
circuits.
I
All wires should be properly loomed and
fused at the source.
I
It is recommended that you have your
authorized retailer install this monitor.
6.
Video Input RCA (YELLOW)
7.
Black Wire - Connect to chassis ground.
8.
Red Wire - Connect to a fused (+) 12 volt.
ignition accessory wire that turns off with
the key.
© 2001 Directed Electronics, Inc.