- ページ 6
ソウ Clarke Woodworker CBS12WVのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke Woodworker CBS12WV 16 ページ。 305mm (12”) portable bandsaw
ページを印刷する
Fig. (1) Main Components
1
Front Cover
2
Front Cover Securing Knob (x4)
3
Rip Fence/ Mitre Gauge
4
Table Set Screw
5
Control Panel (ON/OFF)
6
Speed Control Knob
(1) Attach the Feet
1. Unscrew the fours securing knobs (2) and remove the front cover. (see WARNING above)
2. Attach the feet (12) to the underside of the machine using the nuts and screws
supplied, two for each foot (13, Fig.2).
3. Replace the front cover.
(2) Attach the Table
1. Attach the table tilt bracket (19) to the underside of the table, using the four
screws and nuts supplied, as shown in fig. 3.
2. Remove the table insert (7, Fig. 1) and the counter sunk screw (4, Fig. 1) from the
table slot. (This set screw locks the two sides of the slot together, preventing the
table from flexing during use.)
3. Place the table into position from the motor side of the saw, taking care when
passing the blade through the slot, then secure the table using the washers and
adjusting knobs (18) supplied.
4. Replace the set screw (4, Fig. 1) , and fit the table insert (7, Fig. 1).
1
2
3
6
5
7
4
(Ref: fig 1)
(Ref: fig 3)
8
9
10
12
7
Table Insert
8
Blade Tensioning Screw
9
Blade Guard
10
Upper Blade Guide
11
Dust Extraction Port
12
Feet
6
11