- ページ 9

ヒーター Clarke DEVIL 7003のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke DEVIL 7003 17 ページ。 3kw electric fan heater
Clarke DEVIL 7003 にも：取扱説明書 (17 ページ)

• The room temperature will be maintained at this setting. The heater will

continue to operate until the power switch is turned to the OFF position.

6. For fan only operation, turn the power switch to the fan only setting and set

the thermostat to its minimum setting.

7. When not in use, disconnect the heater from the mains supply. Store it in a

safe, dry, childproof location.

ADJUSTING THE ANGLE

1. Loosen both handwheels.

2. Adjust to the the required angle.

3. Retighten the handwheels.

The Devil 7003 has a manual reset thermal cut out to prevent the unit from

overheating.

If the thermal cut out activates, then turn off the power and disconnect from

the power supply. Allow the heater to cool down for several minutes before

pressing the reset button. Reconnect to the power supply and turn on to

resume operation.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]