Clarke DEVIL 7003 Instrukcja obsługi i konserwacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Grzałka Clarke DEVIL 7003. Clarke DEVIL 7003 17 stron. 3kw electric fan heater
Również dla Clarke DEVIL 7003: Instrukcja obsługi i konserwacji (17 strony)
Drukuj stronę
• The room temperature will be maintained at this setting. The heater will
continue to operate until the power switch is turned to the OFF position.
6. For fan only operation, turn the power switch to the fan only setting and set
the thermostat to its minimum setting.
7. When not in use, disconnect the heater from the mains supply. Store it in a
safe, dry, childproof location.
ADJUSTING THE ANGLE
1. Loosen both handwheels.
2. Adjust to the the required angle.
3. Retighten the handwheels.
SAFETY SYSTEMS
THERMOSTATIC PROTECTION
The Devil 7003 has a manual reset thermal cut out to prevent the unit from
overheating.
If the thermal cut out activates, then turn off the power and disconnect from
the power supply. Allow the heater to cool down for several minutes before
pressing the reset button. Reconnect to the power supply and turn on to
resume operation.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9