- ページ 10

ツール Clarke 6500101のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 6500101 12 ページ。 Pipe notcher

12. With the lock pin removed, apply

cutting fluid, turn drill press On and

perform the notching procedure.

HAND DRILL OPERATION

ITEMS NEEDED

• 1 x 13mm & 2 x 17mm Open End Spanners or Socket Wrenches

• 1 x Hole Saw with 1/2" or 5/8" Thread

• Workbench Mounting Hardware (Not Supplied), As Needed

• Hand Drill

• Cutting Fluid, As Needed

1. Install hole saw and workpiece as described on pages 7 - 8.

2. Mount notcher to workbench using

mounting hardware (not included).

3. Loosen both hex bolts, as shown, swivel

base to desired drilling angle, and tighten

hex bolts.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]