Clarke 6500101 운영 및 유지보수 지침 매뉴얼 - 페이지 10

{카테고리_이름} Clarke 6500101에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6500101 12 페이지. Pipe notcher

12. With the lock pin removed, apply

cutting fluid, turn drill press On and

perform the notching procedure.

HAND DRILL OPERATION

ITEMS NEEDED

• 1 x 13mm & 2 x 17mm Open End Spanners or Socket Wrenches

• 1 x Hole Saw with 1/2" or 5/8" Thread

• Workbench Mounting Hardware (Not Supplied), As Needed

• Hand Drill

• Cutting Fluid, As Needed

1. Install hole saw and workpiece as described on pages 7 - 8.

2. Mount notcher to workbench using

mounting hardware (not included).

3. Loosen both hex bolts, as shown, swivel

base to desired drilling angle, and tighten

hex bolts.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]