- ページ 4
ツール Clarke CFC100のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke CFC100 6 ページ。 Folding crane
Clarke CFC100 にも： 取扱説明書 (13 ページ)
ページを印刷する
SAFETY PRECAUTIONS
IMPORTANT
Before using your crane, it is in your own interest to read and comply with the
following safety rules.
•
NEVER exceed the safe working load capacities as specified on the jib
for each jib extension position.
Stage 1
Lifting capacity (kg)
1000
•
Only use the crane on a flat solid level surface, which is capable of
sustaining the weight of the load.
•
NEVER stand or work beneath a suspended load.
•
Position the load as close to the ground as possible before moving it.
•
Do not allow the load to swing or drop suddenly whilst moving or
lowering.
•
Use only slings or chains with a capacity equal to , or greater than that of
the crane.
•
Do not stand in the path of the jib as loss of load may cause the jib to rise
suddenly.
•
If the load capacity decal on the jib becomes worn or illegible, contact
Clarke International Spares Division for a replacement.
•
Ensure the crane operator is skilled, and trained in both operation and
safety aspects.
•
Inspect the crane before use to ensure it is in good condition. Replace
any damaged or worn parts and ensure all nuts and bolts are tight.
•
When replacing parts, use only parts supplied by Clarke International as
per the parts list on page 10. High tensile bolts are used in the
construction of this crane. NEVER replace them with standard bolts.
Warning
ailure to comply with these rules and precautions may result in loss of
F
load, damage to, or failure of, the equipment, or even personal injury.
Ensure that the crane is properly maintained and lubricated AT ALL
TIMES, and that no rust or other forms of corrosion is allowed to weaken
any part of the crane.
Stage 2
Stage 3
Stage 4
750
500
250
4
9