- ページ 24
デスクトップ Lenovo ThinkCentre M91pのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Lenovo ThinkCentre M91p 38 ページ。 Intel active management technology configuration guide
Lenovo ThinkCentre M91p にも： 仕様 (5 ページ), 配備マニュアル (34 ページ), お知らせ (6 ページ)
ページを印刷する
The Intel ME network stack supports a multihomed IPv6 interface. Each IPv6 network interface can be
configured with the following IPv6 addresses:
• One auto-configured link-local address
• Three auto-configured global addresses
• One DHCPv6-configured address
• One statically configured IPv6 address
The Intel ME IPv6 addresses are dedicated and not shared with the host operating system. To enable
Dynamic DNS registration for IPv6 addresses, you will need to configure a dedicated FQDN.
The IPV6 Feature Selection option is used to enable or disable the IPv6 interface. With IPV6 Feature
Selection enabled, the following options will be displayed.
Option
IPV6 Interface ID Type
IPV6 Address
IPV6 Default Router
Preferred DNS IPV6 Address
Alternate DNS IPV6 Address
Activate Network Access
The Activate Network Access option enables you to activate the current network settings and open the
Intel ME network interface. Without Activating Network Access, ME will not be able to connect to the
network. Select Activate Network Access and press Enter. Press Y or N depending on whether you want
to activate the current network settings.
Activating network access will cause the Intel ME to transition to the post provisioning state if all required
settings have been configured.
Unconfigure Network Access
The Unconfigure Network Access option enables you to reset network settings including network access
control lists (ACLs) to factory default settings. Select Unconfigure Network Access and press Enter. Press Y
or N when prompted.
If you press Y, the following options will be displayed.
16
ThinkCentre M91p Intel Active Management TechnologyConfiguration Guide
Used to specify the IPv6 Interface ID type.
There are three types of IPv6 Interface IDs:
• Random ID: The IPv6 Interface ID is automatically generated
using a random number as described in Request for Comments
(RFC) 3041.
• Intel ID: The IPv6 Interface ID is automatically generated using the
Media Access Control (MAC) address.
• Manual ID: The IPv6 Interface ID is manually configured. Selecting
this option requires that the Manual Interface ID is set to a valid
value.
Enables you to enter the IPv6 address for your Intel AMT computer.
Enables you to enter the IPv6 default router for your Intel AMT
computer.
Enables you to enter the preferred DNS IPv6 address for your Intel
AMT computer.
Enables you to enter the alternate DNS IPv6 address for your Intel
AMT computer.
Description