- ページ 7
デスクトップ Lenovo ThinkStation P910のPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Lenovo ThinkStation P910 49 ページ。 How to create and
configure raid arrays
Lenovo ThinkStation P910 にも: ハードウェア構成 (35 ページ)
14. The user will then be returned to the RSTe menu. The array should now be listed under RAID
Volumes and the disks that are part of the array listed under Physical Devices.
UEFI BIOS Method
Use this method to create a basic RAID array using the onboard Intel S-SATA controller with the system
BIOS set to UEFI mode (OS Optimized Defaults set to 'Enabled' or Storage CSM Configuration is set to
'UEFI').
1. Install the drives for the RAID array into the system (see "How to Utilize Intel S-SATA controller"
section above for installation instructions).
P500/P510
P700/P710