- ページ 6
サーバー Lenovo 7Z46のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Lenovo 7Z46 12 ページ。 Toolless friction rail v2
Lenovo 7Z46 にも： マニュアル (8 ページ)
ページを印刷する
Adjust the Position of the Sliding Brackets (optional)
Bracket position for different server depth:
1
Server depth: 480 mm-560 mm (default position)
2
Server depth: 675 mm-752 mm
3
Server depth: 700 mm-779 mm
4
Server depth: 725 mm-805 mm
Note: Based on the server dimension, you may need to adjust the bracket to make sure the center of gravity of the
server is within the rails. The steps are listed as below.
Step 1. Move rear sliding bracket to the back as shown.
Step 2. Pull the pins of front sliding bracket.
Step 3. Slide the front bracket so the pins lock into the corresponding holes on the rails.
6 6