Lenovo 7Z46 매뉴얼 - 페이지 6

{카테고리_이름} Lenovo 7Z46에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 7Z46 12 페이지. Toolless friction rail v2
Lenovo 7Z46에 대해서도 마찬가지입니다: 매뉴얼 (8 페이지)

Adjust the Position of the Sliding Brackets (optional)

Bracket position for different server depth:

Server depth: 480 mm-560 mm (default position)

Server depth: 675 mm-752 mm

Server depth: 700 mm-779 mm

Server depth: 725 mm-805 mm

Note: Based on the server dimension, you may need to adjust the bracket to make sure the center of gravity of the

server is within the rails. The steps are listed as below.

Step 1. Move rear sliding bracket to the back as shown.

Step 2. Pull the pins of front sliding bracket.

Step 3. Slide the front bracket so the pins lock into the corresponding holes on the rails.

6 6